轧机垂直系统动力学参数辨识

 针对轧机垂直系统动力学参数可信度不足等问题，提出一种基于实测数据的改进粒子群算法辨识轧机垂直系统动力学参数的方法。首先,将轧机垂直系统刚度和阻尼考虑成达芬振子和范德波尔振子，构建轧机垂直系统非线性动力学模型，并对粒子群算法进行改进；然后，通过数值仿真算例辨识得到系统在感染噪声和不含噪声时的动力学参数，验证了该算法的有效性；最后，以现场某轧机垂直系统为研究对象，基于现场实测数据，应用该算法进行辨识，得到了轧机垂直系统动力学参数估计，通过实测位移、速度和加速度信号分别与辨识后的位移、速度和加速度信号进行对比，证明该方法辨识轧机垂直系统动力学参数结果可靠，具有一定的工程应用价值。     

不同类型断层控制油气垂向富集的差异——以渤海湾盆地歧口凹陷歧南斜坡区为例

渤海湾盆地历经多期构造变动，断层圈闭发育普遍。断层作为断层圈闭的边界条件，在油气成藏过程中起着至关重要的作用。以断层圈闭较发育的歧南斜坡区为例分析了同向断层和反向断层控制油气垂向富集的差异，基于三维地震资料，从断层形成过程和断层圈闭分布出发，剖析了断层遮挡圈闭的成因及分布规律。结合油水分布规律，基于油藏解剖并应用储层定量荧光技术明确了不同类型断层控藏的差异及其形成机理。研究表明：①断层分段生长作用和断层上盘与下盘的差异活动是同向断层控制下断层遮挡圈闭形成的主要原因，斜坡区反向断层控制形成的断层圈闭则是断块掀斜翘倾作用所致；②同向断层圈闭发育在断层上盘分段点位置，只有当同向断层进入"硬连接"阶段方可形成断层圈闭，反向断层圈闭形成在断层下盘，在反向断层活动初期便可形成；③同向断层既可以控制油气在多套含油气系统中聚集成藏，也可在一套含油气系统中富集，而反向断层往往控制油气在一套含油气系统中富集；④不同类型断层控制油气垂向聚集的差异与圈闭发育位置以及断-盖配置有关。采用泥岩涂抹系数对沙河街组一段中部盖层控制的含油气系统的垂向调整进行定量评价，泥岩涂抹系数低于3.5时油气保存，泥岩涂抹系数高于3.5时油气垂向渗漏。     

钢铁生产的水能关系分析

从钢铁生产过程中水资源使用时的能耗角度研究了钢铁联合企业的水能关系，提出了水能强度的概念来评价企业生产过程中水资源利用的节能水平，建立了钢铁企业的水能关系模型。以中国某大型钢铁联合企业为例，计算并分析了该企业的水能关系。该企业总的水能量为55 709 kW·h/h，重复用水水能量占整个钢铁企业全部水能量的82%，补水水能量占16%，排水水能量占1%；各工序中热轧工序占比最大，其次是炼铁、炼钢工序，冷轧、烧结和炼焦工序较低。该企业的吨钢水能强度为0.208 kW·h/m3，炼铁工序的水能强度最高，热轧、炼钢工序次之，烧结、冷轧和炼焦工序较低。最后，从钢铁生产过程水资源利用的角度得到节能的方向及措施。     

1-甲基环丙烯结合不同保鲜袋对叶用甘薯茎尖冷藏保鲜效果的影响

目的探究1-甲基环丙烯(1-methylcyclopropylene,1-MCP)结合不同保鲜袋对叶用甘薯茎尖贮藏品质的影响,筛选最适的保鲜方式。方法以叶用甘薯茎尖为材料,经0.91μL/L1-MCP处理24h后结合聚乙烯(PE)或微孔膜(WK)保鲜袋包装,在5℃下进行贮藏,分别于0、3、6、9、12 d时对其失重率、色差、黄化率、呼吸强度、乙烯释放量、多酚氧化酶活性等指标进行测定。结果贮藏12 d后, 1-MCP+PE, 1-MCP+WK处理组的失重率分别为3.43%,2.72%,显著低于未经1-MCP处理组(P0.05),说明1-MCP处理能够有效抑制叶用甘薯茎尖失水; 1-MCP+WK处理下的L值为33.9,高于其余3种处理,表明该处理能够更好的保持叶用甘薯茎尖的亮度和新鲜感。此外,1-MCP结合保鲜袋处理能够减弱呼吸作用,降低乙烯释放量及多酚氧化酶活性。结论1-MCP处理并结合PE膜或者微孔膜包装对叶用甘薯茎尖具有良好的保鲜效果,可以有效延长其贮藏期。     

基于风险分析的小型水库安全管理研究

为有效提高小型水库安全管理水平,搭建基于风险分析的差异化安全管理体系,从赋存环境、结构材料、监督管理、失事损失等安全风险因子出发,基于工程安全风险特点对小型水库进行了分区分类,在此基础上有针对性地构建了责任落实、资源配置、信息感知、预警预报、维修养护、应急响应、除险加固等动态风险管理体系,并给出了相应指标.某市小型水库群的安全管理实际应用效果表明,上述方法能有效解决数量多、分布广、资料缺、条件差等条件下的小型水库安全管理问题.     

超高层建筑消防给水系统分区的评价方法探讨

针对超高层建筑消防给水系统的不同分区形式,提出了对消防给水系统分区的评估和评价的问题.超高层建筑消防给水系统分区的评价有利于解决系统分区形式,从定性与定量的角度给出评价的结果,建立了基于可靠性为基础的分区形式系统评价方法.消防给水分区的系统评价包括直接评定和综合评定的评定方法.直接评价对存在重大隐患的设计进行对标评定.综合评定可以采用不同的指标进行多因素的评估,提出了评估的指标,并给出了系统组件可靠度的计算方法.     

Microwave synthesis of worm-like SiC nanowires for thin electromagnetic wave absorbing materials

Thin thickness is always the pursuit of excellent electromagnetic wave absorbing materials. Herein, SiC nanowires with worm-like morphology were synthesized by microwave heating the mixture of expanded graphite and silica. The worm-like SiC nanowires exhibit an excellent microwave absorption ability at a thin thickness. With the filling ratio of SiC nanowires increases in the matrix, the dielectric loss and microwave absorbing ability are significantly enhanced; meanwhile the number of absorption peaks is gradually increased, and the absorption peaks also move toward a thinner thickness. When the nanowires filling ratio was 40?wt%, the minimum reflection loss reached down to ?35.2?dB and the effective absorption (RL?<??10?dB) bandwidth was 1.8?GHz?at a thickness of 1.3?mm. The possible growth mechanism of the worm-like SiC nanowires is that the intermediate reaction gas phases, SiO and CO, were confined in the relatively independent tiny pores of expanded graphite. This resulting in an excessive local gas phase pressure, which causes the nanowire growth direction changes randomly.     

Effect of Gd doping on electrical transport properties of La0.8Sr0.2MnO3 polycrystalline ceramics

Gd doped La_0.8Sr_0.2MnO₃ (La_0.8-xGd_xSr_0.2MnO₃, LGSMO) ceramics were prepared by a sol-gel method. X-ray diffraction (XRD) patterns showed that all samples exhibited distorted perovskite structures, R_3c. When the Gd³⁺ content x > 0.03, the crystal structure changed to orthorhombic, Pnma. Scanning electron microscopy (SEM) images showed that the ceramics characterize high density and grain boundary connectivity, and higher Gd³⁺ doping decreased the grain size from 26.72 μm to 7.42 μm. The temperature dependence of resistivity showed a transition from a low-temperature metal to a high-temperature insulator. The resistivity increased with Gd doping content, and the metal-insulator transition temperature, T_P, increased first and then decreased, while the temperature coefficient of resistance (TCR) of the samples first decreased and then increased with Gd³⁺, and the magnetoresistance (MR) increased first and then decreased. The peak TCR at x = 0.06 was 5.18%·K^?1, and MR at 0.04 was 34.57%. The electrical transport properties of the ceramics were explained based on the double exchange (DE) interaction mechanism. The obtained material may have application prospects in magnetic devices and infrared detectors.     

Synthesis of strontium (Sr) doped hydroxyapatite (HAp) nanorods for enhanced adsorption of Cr (VI) ions from wastewater

The development of high-efficiency adsorbents for heavy metal ion removal from wastewater is highly desirable and challenging due to their synthesis complexity and low adsorption capacities. Herein, we reported the synthesis of strontium (Sr) doped hydroxyapatite (HAp) for the increased Cr (VI) adsorption. The effects of pH, temperature, and time on adsorption performances were studied. As a result, the Sr-HAp nanorods can achieve a Cr (VI) adsorption capacity of 443 mg/g, which is significantly higher than that of HAp nanorods (318 mg/g). To better understand the adsorption mechanism, the Langmuir isotherm model was established. The modeling results indicated that Langmuir monolayer chemical adsorption contributed to the efficient Cr (VI) ion removal for Sr-HAp nanorods adsorbents. The surface area and surface functional groups (O–H) contributed to the different Cr (VI) adsorption capacities between HAp and Sr-HAp.     

Fabrication of crescent-shaped ceramic microparticles based on single emulsion microfluidics

Ceramic microparticles have great potentials in various fields such as materials engineering, biotechnology, microelectromechanical systems, etc. Morphology of the microparticle performs an important role on their application. To date, it remains difficult to find an effective and controllable way for fabricating nonspherical ceramic microparticles with 3D features. This work demonstrates a method that combines UV light lithography and single emulsion opaque-droplet-templated microfluidic molding to prepare the crescent-shaped ceramic microparticles. By tailoring the intensity of UV light and flow rate of fluid, the shapes of microparticles are accordingly tuned. Therefore, varieties of crescent-shaped microparticles and their variations have been fabricated. After sintering, the crescent-shaped alumina ceramic microparticles were obtained. Benefitting from the light absorption and scattering behavior of most ceramic nanoparticles, this system can serve as a general platform to produce crescent-shaped microparticles made from different materials, and hold great potentials for applications in microrobotics, structural materials in MEMS, and biotechnology.